Activate / Set Up Device - Samsung Stellar™

If you need to transfer contacts and media from one device to another, follow these step-by-step instructions before activating the new device.

Precaución To avoid potential issues, review the following: 

 

  1. If powered off, press and hold the Power button (located on the right edge) until the Samsung logo appears then release.
  2. Tap the appropriate Language then tap Next (located in the lower-right).
    Nota Allow several seconds for activation to complete.
  3. From the 'Your Verizon phone is now active' screen, tap Next.
  4. From the Setup Wizard screen, tap Next.
  5. From the Backup Assistant Plus screen, tap Skip then tap Not Now.
  6. If applicable, tap an existing service (e.g. Facebook, Yahoo! Mail, etc) enter the appropriate credentials (e.g., username, password, etc.) then tap Next.
    Nota If presented, review the Terms and Conditions, select I agree/Yes then tap Next to continue service setup.
    Nota Repeat this step as necessary to setup additional services.
  7. Configure the location settings (e.g., VZW location services, etc.) then tap Next.
    Nota If presented, review the information then select Agree to continue.
    Nota Enabled when a checkmark is present.
  8. Tap a Mode (Starter or Standard) then tap Next.
  9. From the Guided tours screen, tap Next.
  10. From the Google service login screen, tap Skip .

 

Temas relacionados:

isTealiumFlag=true