Set Up Device - Samsung Galaxy Tab™

Si necesitas transferir los contactos y medios de un dispositivo a otro, sigue estas instrucciones paso a paso antes de activar el nuevo dispositivo.

Precaución Para evitar posibles problemas, revisa la siguiente información:

  1. If powered off, press and hold the Power button (located on the right edge) until the Verizon logo appears then release.
    Nota If presented with a lock screen, swipe the lock right to unlock.
  2. Tap the appropriate language then tap Activate.
    Nota Espera varios segundos para que se complete la activación.
  3. Once your device is active and you see 4G in the upper right, tap Settings.
  4. Tap Verizon data.
  5. Tap Select service.
  6. Naviagate: Activate > Month to month > Activate (*228).
  7. Your device will complete network activation.
    Nota Completa estos pasos para configurar como dispositivo solo de Wi-Fi y evitar la activación de red:
    1. Press Volume up (located below the Power button) once.
    2. Press Volume down twice.
    3. Press Volume up three times.
    4. Press Volume down four times.
    5. Tap Skip.
  8. From the Google account screen, tap Skip.
  9. If presented with the Wi-Fi setup screen, tap Skip.
  10. From the account setup screen, tap Skip.
    Nota If desired, select an existing service (e.g., Facebook, AOL, etc.) follow the on-screen instructions then tap Next.
  11. From the Location Services screen, tap the desired location options to enable or disable then tap Next.
    Nota Activado cuando hay una marca de verificación.
    • VZW location services
    • Standalone GPS services
    • Google location services
  12. If presented, review the disclaimer then tap Agree.
    Nota Según la opción habilitada, es posible que la nota legal que aparezca varíe.
  13. Oprime Next.
  14. From the Backup Assistant screen, tap Skip.
    Nota To set up after activating, navigate: Home > Backup Assistant.
  15. Oprime OK.
  16. Tap Exit.
  17. Tap Begin.

Temas relacionados:

isTealiumFlag=true