Alcatel GO FLIP™ V - Insert SD / Memory Card

Nota This device supports microSD (TransFlash) memory cards, which can be purchased from any  tienda de Verizon o en la tienda por internet.

  1. Asegúrate de que el dispositivo esté apagado.
  2. Quita la tapa de la batería.
    Nota With the phone facing down, insert your fingernail into the cutout located on the bottom corner of battery cover to lift and remove.
    Locate cutout
  3. Sujeta la muesca y luego levanta y quita la batería.
    Use notch to remove battery
  4. With the gold contacts facing down, insert the memory card. Once the card is fully inserted, the latch will automatically lift and hold it in place.
    Nota If needed, press down on the latch to insert the card.
    Insert sd / memory card
  5. Inserta la batería. 
    Nota Ensure the three arrows are pointing to the bottom of the device and the gold contacts line up then press down gently to secure.
    Insertar la batería
  6. Vuelve a colocar la tapa de la batería. 
    Nota Press down along the edges to lock into place.


Tema relacionado: Remove SD / Memory Card