Samsung Galaxy S10 - Set Up Fingerprint Recognition

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to 4 fingerprints can be registered on the device.

 

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    Nota These instructions only apply to modo estándar and the default Home screen layout.
  2. Navigate: Settings Ícono Settings > Biometrics and security.
  3. From the Biometrics section, tap Fingerprints.
    Nota Si aparece, ingresa el PIN, la contraseña o el patrón actuales.
  4. If presented, tap Continue and select a lock screen option (e.g., Pattern, PIN or Password) then follow the steps to complete the process.
    Nota Si es necesario, consulta Configurar bloqueo de pantalla para obtener ayuda.
  5. If prompted, tap continue to register your fingerprint by swiping your fingertip down over the sensor to scan.
    Nota View the on-screen tutorial for the location of the sensor and assistance.
    Nota Repeat this step as necessary until the process is complete.
  6. Tap Done (lower-right).
  7. Tap the Fingerprint unlock switch to turn on Interruptor en On o desactivar Interruptor en Off.

 

Temas relacionados:

isTealiumFlag=true