Verizon Jetpack® MiFi® 8800L - Advanced Settings

To change the advanced settings (e.g., VPN Passthrough enable, Network Name broadcast enable, etc.) on your Jetpack, view this info.

Precaución Cambiar las configuraciones avanzadas puede dañar la estabilidad, rendimiento y seguridad de Jetpack. Contáctate con tu administrador de TI local antes de cambiar cualquiera de las siguientes configuraciones.

  1. Accede a la Admin Web Interface.
  2. Click Jetpack Settings.
  3. Click the Advanced tab, review the warning then click Continue.
  4. Click any of the following (located below the Advanced tab):

 

Redes

Nota For info regarding APN settings, refer to Editar nombre del punto de acceso (APN).

  1. From the Mobile Network section, click the switch to turn mobile data on or off.
  2. From the Network Settings section view the Network mode (LTE/UMTS).
    Nota If needed, click Select network manually > Scan for Networks to search for other available networks.
  3. Haz clic en Save Changes.

 

Volver a Advanced options
Arriba

 

DNS manual

Precaución El dispositivo asigna automáticamente la configuración del servidor de nombre de dominio (DNS). If turning on manual DNS is necessary, contact your local IT administrator for assistance.

  1. Select Turn on Manual DNS to turn on or off.
    Nota Está activado cuando tiene una marca de verificación.
  2. From the DNS 1 IP address and DNS 2 IP address fields, enter the appropriate info.
  3. Haz clic en Save Changes.

 

Volver a Advanced options
Arriba

 

SIM

Nota Consulta Turn SIM PIN On / Off.

 

Volver a Advanced options
Arriba

 

Firewall

  1. Tap the switch for any of the following to turn on or off:
    • VPN Passthrough
    • IPv6 Transparent Mode
  2. From the DMZ (IPv4) section, select DMZ to turn on or off.
    Nota Está activado cuando tiene una marca de verificación.
    Nota If on, enter the appropriate IP address into the Destination IP address field.
  3. Haz clic en Save Changes.

 

Volver a Advanced options
Arriba

 

MAC Filter

Nota Consulta Filtros de MAC.

 

Volver a Advanced options
Arriba

 

LAN

  1. From the IPv4 section, enter the desired info into the following fields:
    • Dirección IP
    • Subnet Mask
    • Dirección MAC
    • Turn on DHCP server
      Nota Está activado cuando tiene una marca de verificación.
    • DHCP lease time
    • Comenzar rango de dirección DHCP en
  2. From the IPv6 section, select Turn on IPv6 to turn on or off.
    Nota Está activado cuando tiene una marca de verificación.
  3. Haz clic en Save Changes.

 

Volver a Advanced options
Arriba

 

Filtros de puerto

Nota Consulta Filtros de puerto.

 

Volver a Advanced options
Arriba

 

Transferencia de puerto

Nota Consulta Transferencia de puerto.

 

Volver a Advanced options
Arriba

 

VPN

Nota When an OpenVPN tunnel is established, all connected device traffic is sent through the tunnel and settings such as Port Filtering and Port Forwarding don't apply.

  1. Click the Auto-connect VPN switch to turn on or off.
  2. If VPN is configured, view the Connection status and Connection time from the VPN Connection section.
    Nota You can also click View log to view past connection info.
  3. From the VPN settings section, enter the Username and Password in to the fields.
  4. If needed, drag and drop files from your VPN provider into the Setup files box.
  5. To delete saved VPN info, click Clear all VPN settings.
  6. Haz clic en Save Changes.

 

Volver a Advanced options
Arriba

isTealiumFlag=true