Verizon 5G Home Router 1A - Add a WPS Device

Verizon 5G Home service is currently offered in specific areas; haz clic aquí to check for 5G coverage availability.

Nota Notas:

  • También puedes connect using WPS from your My Verizon app.
  • Broadcast Network Name (SSID) and WPS must be capacitado to use WPS.
  • Wi-Fi Protected Setup (WPS) allows new wireless clients (devices) to be added without having to enter any wireless credentials (network name, password/key); the wireless client must support WPS.

  1. From the back of the router, locate the WPS button.
    Verizon 5G Home Router WPS button position
  2. Press the WPS button for at least 2 seconds to start the pairing process.
    Nota WPS pairing is active for two minutes before the WPS setup times out.
  3. Once the pairing process begins press the WPS button on the device you want to connect to your Verizon 5G Home router.

Arriba

Enable WPS

  1. Entra al Admin WebGUI.
    Nota You must be connected to the Verizon 5G Home network to access the admin page.
  2. From the Wi-Fi panel, click the Arrow icon Ícono de flecha derecha.
    Router Home screen
  3. From Wi-Fi, click Primary Network.
  4. From Options, ensure Broadcast primary network name (SSID) and WPS are both enabled.
    Nota Settings are enabled when a check mark Ícono de la casilla de verificación está presente.
    5G Home Wi-Fi settings with emphasis on Primary Netwrok settings
  5. Haz clic en Save Changes.

Arriba

isTealiumFlag=true