Samsung Galaxy Note9 - Set Up Fingerprint Recognition

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to 4 fingerprints can be registered on the device.

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    Nota These instructions only apply to modo estándar and the default Home screen layout.
  2. Navigate: Settings Ícono Settings > Biometrics and security.
  3. From the Biometrics section, tap Fingerprint Scanner.
    Nota Si aparece, ingresa el PIN, la contraseña o el patrón actuales.
  4. If presented, tap CONTINUE and select a lock screen option (e.g., Pattern, PIN, Password) then follow the steps to complete the process.
    Nota Si es necesario, consulta Configurar bloqueo de pantalla para obtener ayuda.
  5. Swipe your fingertip down over the fingerprint sensor (back of device).
    Nota View the on-screen tutorial for assistance.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  6. Tap DONE (lower-right).
  7. If presented, tap the Notifications switch (upper-right) to turn on Interruptor en On o desactivar Interruptor en Off then tap DONE.
    Nota When on, configure any of the following:
    • Hide content
      Nota Tap to turn on or off.
    • Notification icons only
      Nota Tap to turn on or off.
    • Transparency
      Nota Slide the blue bar left or right to adjust the level while viewing the preview at the top.
    • Auto-reverse text color
      Nota Tap to turn on or off.
      Nota Reverses the color of notification text based upon background color.
  8. If presented, tap TURN ON.

Temas relacionados: