moto g6 - Set Up Fingerprint Recognition

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to 5 fingerprints can be registered on the device.

 

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Ícono Settings > Security & location.
  3. From the Device security section, tap Fingerprint.
  4. Tap SET UP.
    Nota Si corresponde, ingresa el PIN, la contraseña o el patrón actuales.
  5. Choose any of the following then follow the prompts to establish a backup Pattern, PIN or Password than tap YES:
    • Fingerprint + Pattern
    • Fingerprint + PIN
    • Fingerprint + Password
  6. From the Notifications screen choose one of these options then tap Done:
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all
  7. Place your finger on the sensor until it vibrates, then tap START.
  8. Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  9. Tap Next (lower-left).
  10. Tap GOT IT.

 

Temas relacionados:

isTealiumFlag=true