moto e5 play - Set Up Fingerprint Recognition

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to five fingerprints can be registered on the device.

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Ícono Settings > Security & Location Security & Locations Settings Icon.
  3. From the Device Security section, tap Fingerprint.
  4. Tap NEXT.
    Nota Si corresponde, ingresa el PIN, la contraseña o el patrón actuales.
  5. If presented with an 'Unlock selection' screen, select a backup lock option:
    Nota Consulta Configurar bloqueo de pantalla para obtener ayuda.
    • Fingerprint + Pattern
    • Fingerprint + Pin
    • Fingerprint + Password
  6. If presented with the 'Secure start-up' screen, select an option:
    • NO
  7. If presented with the 'Notifications' screen, select an option, then tap DONE:
    • Show all notifcation content
    • Hide sensitive notification content
    • Don't show notifications at all
  8. Locate the fingerprint sensor below the display then tap NEXT (lower-right).
  9. Review the info then tap NEXT.
  10. Place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  11. Tap DONE

Temas relacionados:

isTealiumFlag=true