ZTE Blade™ Vantage - Manage Data Usage

Nota Notas:

  • Data usage info provided by the device may differ from actual usage. For data usage info provided by Verizon, refer to the sitio web de Mi Verizon.
  • Ícono de videocámara For a better understanding of how data used, check out this video.
  • To control data usage on your account, refer to Qué es Verizon Smart Family™

 

  1. En una de las pantallas de inicio, ve a: Apps Ícono de la aplicación > Settings.
  2. Tap Data usage then do one of the following:
    • Set Mobile Data Limit:
      Precaución Mobile / cellular data is disabled upon reaching the specified data usage level indicated by the red limit line. To continue to utilize apps dependant upon a data connection (e.g., Browser, Email, Market, etc.), Wi-Fi can be used or mobile data must be manually adjusted (overage charges may apply).
    1. Tap Limit to turn on Interruptor en On.
      Nota Si es necesario, revisa la notificación y toca OK para confirmar.
    2. The default limit is set to 5GB, to change the limit:
      1. Tap Mobile data usage.
      2. Tap the Gear icon Ícono Settings (esquina superior derecha).
      3. Enter the desired limit (e.g., 2GB, 500 MB, etc.) then tap SET.
    • Set Mobile Data Warning:
       Nota A notification message appears upon reaching the specified data usage level indicated by the gray warning line.
      1. Tap Alert me to turn on Interruptor en On.
        Nota Si es necesario, revisa la notificación y toca OK para confirmar.
      2. The default limit is set to 2GB, to change the limit:
        1. Tap Mobile data usage.
        2. Tap the Gear icon Ícono Settings (esquina superior derecha).
        3. Enter the desired limit (e.g., 4GB) then tap SET.
    • Change Data Usage Cycle:
      1. Tap Billing cycle.
      2. Tap Billing cycle again, configure the usage cycle date then tap SET.
        Nota Visita el sitio web de Mi Verizon for the billing cycle date.

 

Nota To view or limit individual app usage, refer to View / Restrict Data Usage by App.

isTealiumFlag=true