Set Up Device - GL300VC - Cold Chain

Indicadores LED
Device's Capabilities

  1. Para activar el dispositivo:
    1. Turn the device on by pressing the Power button (located on the top).
    2. Device automatically initiates OTA as part of the boot up process.
      Nota If Cell LED flashes quickly, that means the signal is too weak to register with the network. Move to a location with stronger signal.
  2. To power cycle the device:
    • Method 1: Press & hold the Power button for at least 3 seconds until power LED lights up.
    • Method 2: Connect device to charger or external battery. Device turns on automatically and the power LED lights up.
  3. To use the function key:
    1. Geo-Fence mode: Long press the Function key to enable or disable Geo-Fence ID0).
    2. Geo-Fence in current position mode: Long press the function key to enable /disable Geo-Fence.
    3. SOS mode (Default): Long press the Function key to activate SOS alarm.
  4. Connect a 5V DC adapter to power and charge the internal battery.
    Nota Backend server developer or administrator can use Mini USB to configure device.

Indicadores LED

Indicadores LED

Arriba

Capacidades del dispositivo

  • Haptic feedback for button operations
  • Resistente al agua
  • Dual Band CDMA 2000 1XRTT frequencies 800/900 MHz
  • GPS Location tracking
  • Emergency alert system
  • Geo-Fencing (Support up to 5 geofence regions)
  • 3 Axis accelerometer for motion detection
  • Can be connected to external DC power or battery

Device details

Arriba

isTealiumFlag=true