Mobile Hotspot Settings - Kyocera DuraXVLTE

To configure Mobile Hotspot settings (e.g., password, allowed devices, etc.), view this info

  1. En la pantalla principal, selecciona Menu.
    Nota Usa el dispositivo de navegación de 5 direcciones para resaltar y el botón central para seleccionar.
    5-way Navigation Pad
  2. Select Tools & Settings.
    Select Tools & Settings
  3. Selecciona Settings.
    Selecciona Configuraciones
  4. Select Wireless & networks.
    Select Wireless & Networks
  5. Select Tethering and Mobile Hotspot.
    Select Tethering and Mobile Hotspot
  6. Select Mobile Hotspot.
    Selecciona "Mobile Hotspot".
  7. Select Mobile Hotspot again.
    Selecciona "Mobile Hotspot".
  8. Highlight On then select Set to turn on the mobile hotspot.
    Selecciona Establecer
  9. If prompted, read the info about the mobile hotspot then select OK.
    Selecciona OK
  10. If prompted, read the info about the mobile hotspot using data service then press the left soft key to choose Yes.
    Selecciona Yes
  11. Select Setup Mobile Hotspot.
    Select Set Up Mobile Hotspot
  12. From the Setup Mobile Hotspot screen, configure the following as needed:
    • Nombre de la red
      • Enter a network name.
         Nota To hide your connection from other devices, navigate to Hide my device then press left soft key to choose Check.
    • Seguridad
      1. Highlight the Security field then press the left soft key to choose Set.
      2. Highlight an option then select Set:
        • WPA2 PSK
        • Open
    • Contraseña
      1. If preferred, highlight Show password then press the left soft key to choose Check.
        Nota Show password is selected when a check mark is present.
      2. Select the Password Field then enter the new password.
        Nota Password must be at least 8 characters, see example image below.
        Nota The new password must be entered on the connecting device.
    Configuraciones del hotspot móvil
  13. Select Save.
    Selecciona Save
  14. Press the right soft key to choose Continue.
    Selecciona Continuar

 

Nota Consulta este demo interactivo para obtener más información.

isTealiumFlag=true