moto z2 force edition - Set Up Fingerprint Recognition

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to 5 fingerprints can be registered on the device.


  1. From a Home screen, swipe up to display all apps.
  2. Navigate: Settings Ícono Settings > Security & location Security and Location icon.
  3. From the Device Security section, tap Fingerprint.
  4. Tap Set up.
    Nota If presented, enter the current PIN, password, or pattern then skip to paso 7.
  5. If presented with a lock screen notification, tap to choose your 'backup screen lock method':
    Nota Consulta Configurar bloqueo de pantalla para obtener ayuda.
    • Fingerprint + Pattern
    • Fingerprint + PIN
    • Fingerprint + Password
  6. If presented, select an option then tap Done.
    • Show all notification content

    • Hide sensitive notification content

    • Don't show notifications at all

  7. Locate then tap the fingerprint sensor below the display to continue.
  8. Review the info then tap Start.
  9. Place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  10. Oprime Done.


Temas relacionados: