Set Up Fingerprint Recognition - moto e4

Nota Notas:

  • A fingerprint can be used to unlock devices that have a fingerprint scanner.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to five fingerprints can be registered.

 

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Ícono Settings > Security.
  3. From the Device Security section, tap Fingerprint.
  4. Tap NEXT.
    Nota Si corresponde, ingresa el PIN, la contraseña o el patrón actuales.
  5. If presented with an 'Unlock selection' screen, select a backup lock option:
    Nota Consulta Configurar bloqueo de pantalla para obtener ayuda.
    • Fingerprint + Pattern
    • Fingerprint + Pin
    • Fingerprint + Password
  6. If presented with the 'Secure start-up' screen, select an option:
    • Require pattern/PIN/password to start device
    • No, gracias
  7. Locate the fingerprint sensor below the display then tap NEXT (lower-right).
  8. Review the info then tap NEXT.
  9. Place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  10. Tap NEXT.
  11. If presented, review the info then tap GOT IT.

 

Temas relacionados:

isTealiumFlag=true