Set Up Fingerprint Recognition - Samsung Galaxy Tab S3

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to four fingerprints can be registered on the device.

 

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
  2. Navigate: Settings Ícono Settings > Biometrics and security (left pane).
  3. From the Biometrics section (right pane), tap Fingerprint scanner.
    Nota Si aparece, ingresa el PIN, la contraseña o el patrón actuales.
  4. If presented, tap CONTINUE then select a lock screen option (e.g., Pattern, PIN, Password, etc.) then follow the steps to complete the process.
    Nota Consulta Configurar bloqueo de pantalla para obtener ayuda.
  5. Locate the Home button below the display and place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  6. Tap CONTINUE then turn and place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  7. If presented, select an option then tap DONE.
    • Show content
    • Hide content
    • No mostrar notificaciones
  8. If presented, tap TURN ON.

 

Temas relacionados:

isTealiumFlag=true