Change Device Password - Samsung Galaxy Tab S3

Nota Notas:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • A pattern, PIN or password must be set up to turn on factory reset protection.
    Nota Changing screen lock to "None" or "Swipe" turns off this feature.

 

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
  2. Navigate: Settings Ícono Settings > Lock screen (left pane).
  3. From the right pane, tap Screen lock type.
    Nota Si aparece, ingresa el PIN, la contraseña o el patrón actuales.
  4. Oprime una de las siguientes opciones:

 

Pattern

Nota Se crea un patrón de desbloqueo para acceder al dispositivo.

  1. Draw an unlock pattern (connecting at least 4 dots) then tap CONTINUE.
  2. Draw the same pattern again then tap CONFIRM.
  3. If presented, select an option then tap DONE.
    • Show content
    • Hide content
    • No mostrar notificaciones
  4. If prompted to set up fingerprint lock, select the desired option:
    • LATER
    • INSTALAR
      Nota Follow the remaining on-screen instructions.

 

Arriba

 

PIN

Nota Se crea un número de identificación personal (PIN) para acceder al dispositivo.

  1. Enter a numeric PIN (4 to 16 digits) then tap CONTINUE.
  2. Re-enter the numeric PIN then tap OK.
  3. If presented, select an option then tap DONE.
    • Show content
    • Hide content
    • No mostrar notificaciones
  4. If prompted to set up fingerprint lock, select the desired option:
    • LATER
    • INSTALAR
      Nota Follow the remaining on-screen instructions.

 

Arriba

 

Password

Nota Se crea una contraseña para acceder al dispositivo.

  1. Enter a password (4 to 16 characters, including at least one letter) then tap CONTINUE.
  2. Re-enter the password then tap OK.
  3. If presented, select an option then tap DONE.
    • Show content
    • Hide content
    • No mostrar notificaciones
  4. If prompted to set up fingerprint lock, select the desired option:
    • LATER
    • INSTALAR
      Nota Follow the remaining on-screen instructions.

 

Arriba

isTealiumFlag=true