moto e4 - Set Up Screen Lock

Nota Notas:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • También puedes utilizar estos pasos para cambiar tu configuración actual de bloqueo de pantalla.
  • A pattern, PIN or password must be set up to turn on factory reset protection.
    Nota Changing screen lock to "None" or "Swipe" turns off this feature.

  1. From a Home screen, swipe up to access all apps.
  2. Navigate: Settings Ícono Settings > Security.
  3. From the Device security section, tap Screen lock.
    Nota Si corresponde, ingresa el PIN, la contraseña o el patrón actuales.
  4. Selecciona una de estas opciones:

Ninguno

If prompted, review the notification regarding device protection then tap YES, REMOVE to confirm.

Arriba

Huella dactilar

Nota A lock screen requiring a fingerprint match (or alternative PIN/Pattern/Password) is used to access the device.

Follow on-screen prompts to set up fingerprint security.

Arriba

Deslízate

Nota A lock screen requiring a left or right swipe is created to access the device.

If prompted, review the notification regarding device protection then tap YES, REMOVE to confirm.

Arriba

Pattern

Nota Se crea un patrón de desbloqueo para acceder al dispositivo.

  1. Select one of the following options then tap CONTINUE (located in the lower-right).
    • Require pattern to start device
    • No, gracias
  2. Draw an unlock pattern (connecting at least 4 dots) then tap CONTINUE.
  3. Draw the same pattern again then tap CONFIRM.
  4. If presented, select an option then tap DONE (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

Arriba

PIN

Nota A PIN is created to access the device.

  1. If presented with the PIN policy screen, tap OK.
  2. Select one of the following options then tap CONTINUE (located in the lower-right).
    • Require PIN to start device
    • No, gracias
  3. Enter a numeric PIN (4 to 16 digits) then tap CONTINUE.
  4. Re-enter the numeric PIN then tap OK.
  5. If presented, select an option then tap DONE (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

Arriba

Password

Nota Se crea una contraseña para acceder al dispositivo.

  1. If presented with the Password policy screen, tap OK.
  2. Select one of the following options then tap CONTINUE (located in the lower-right).
    • Require password to start device
    • No, gracias
  3. Enter a password (4 to 16 characters) then tap CONTINUE.
  4. Re-enter the password then tap OK.
  5. If presented, select an option then tap DONE (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

Arriba

isTealiumFlag=true