Arlo Go - Remove SD / Memory Card

Precaución Don't attempt to remove the SD / Memory Card while the device is powered on. Doing so may harm the SIM card and/or the device.

  1. Ensure the camera is disconnected from the power adapter.
  2. Open the battery door.
    Nota Press and hold the latch (located on the top edge) then rotate the door down.
  3. If present, remove the battery as shown.
    Nota Utilizing the notches on both sides, pull to remove.
    Quita la batería
  4. Remove the SD / Memory Card from the slot as shown.
    Nota If necessary, press in on the card to unlock it.
    Nota Si corresponde, consulta Insert the SD / Memory Card.
    Remove SD / Memory Card
  5. If applicable, insert the battery as shown.
    Nota Asegúrate de que los conectores de la batería se alineen con los conectores del dispositivo.
    Insertar la batería
  6. Close the battery door.
    Nota Rotate the door up and ensure it locks into place.
    Close battery door