LED Status Indicators - Arlo Go

Camera with LED indicator

Azul fijo Solid blue: The camera is registered and is connected to the mobile network.
Azul titilante Very slow blinking blue: The camera is powering on.
Azul titilante Slow blinking blue: The camera is ready to scan the QR code.
Azul titilante Blinking blue: The camera is scanning the QR code.
Azul titilante Fast blinking blue:

The camera is connected to the cloud.

During charging, blinking for three seconds indicates that charging started and blinking for two seconds indicates that charging is complete.
Blinking blue and purple Blinking blue and purple: The camera is connecting to the network and the cloud.
Ámbar liso Solid amber:

No SIM card is inserted or the SIM card is damaged.

During a sync, the battery charge is low.

During the motion detection test, motion is detected.
Ámber titilante Blinking amber: Mobile network coverage is not available.
Ámber titilante Slow blinking amber: The battery level is low.
Ámber titilante Double blinking amber: The battery level is so low that it is critical.
Blinking amber and purple Blinking amber and purple: The SD card type is invalid.
Blinking blue and amber Blinking blue and amber: The camera is receiving a firmware upgrade.
Ámber titilante Fast blinking amber:

The camera connected to the cellular network but it cannot connect to the cloud.

During a QR code scan, the scan failed.

During battery charging, the charge failed.
isTealiumFlag=true