Arlo Go - Insert SD / Memory Card

Nota Notas:

  • This device supports a microSD memory card (SDHC or SDXC only) with up to 32 GB capacity, file format FAT32.
    Nota For best performance, class 4 or higher is recommended.
  • Puedes comprar tarjetas de memoria en cualquier tienda de Verizon Wireless o en la tienda por internet.

  1. Ensure the camera is disconnected from the power adapter.
  2. Open the battery door.
    Nota Press and hold the latch (located on the top edge) then rotate the door down.
  3. If present, remove the battery as shown.
    Nota Utilizing the notches on both sides, pull to remove.
    Quita la batería
  4. Insert the card as shown (gold contacts facing up).
    Insert SD / Memory Card
  5. If applicable, insert the battery as shown.
    Nota Asegúrate de que los conectores de la batería se alineen con los conectores del dispositivo.
    Insertar la batería
  6. Close the battery door.
    Nota Rotate the door up and ensure it locks into place.
    Close battery door

Tema relacionado: Remove the SD / Memory Card