Wear24™ - Manually Add a Wi-Fi Network

Nota Notas:

  • Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  • Para seguir los pasos que aparecen a continuación, necesitas:
    • use an Android Smartphone as your companion device.
      Nota If your watch is paired with an iPhone, the ability to add a hidden Wi-Fi network isn't available.
    • ensure the Wear OS by Google app is instalado y actualizado en tu smartphone.
    • ensure Bluetooth is enabled on both the mirar and smartphone.
    • keep the watch near your smartphone throughout the entire process.

Follow these steps on your watch to begin Wi-Fi setup:

  1. From the Home screen, press the Power button to display the menu.
    Nota The Power button is located on the right edge.
    Power button with Menu
  2. Oprime Settings Ícono Settings.
  3. Tap Connectivity Connectivity icon.
  4. Oprime Wi-Fi Ícono de Wi-Fi.
  5. Tap Add network.
  6. Tap Add hidden network.
  7. Tap Open on phone.
    Nota the Wear OS by Google app on the smartphone opens to the Accounts screen.

Follow these steps on your companion smartphone to complete Wi-Fi setup.

  1. From the Network name (SSID) field, enter the appropriate name.
  2. From the Security field, tap the Dropdown menu.
  3. Selecciona la opción de seguridad apropiada:
    Nota Si usas una red abierta (None), salta al paso 5.
    • Ninguno
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
  4. En el campo Password, ingresa la contraseña adecuada.
    Nota Para ver la contraseña mientras la escribes, oprime (marca) Show password.
  5. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap Save or Connect (lower-right).