Filtros de MAC - Verizon Jetpack® MiFi® 7730L

Precaución Precaución:

  • MAC Filter is an advanced feature. Contact your local IT administrator prior to altering this setting.
  • If turned on, only the devices added to the MAC address filter list can access the jetpack's primary Wi-Fi network.

Nota This MAC filter has no effect on the guest Wi-Fi network or USB devices.

 

  1. Accede a la Admin Web Interface.
  2. En el menú de la izquierda, haz clic en Jetpack Settings.
  3. From the Advanced tab, click Continue (located on the right).
  4. Click MAC Filter (located below the Advanced tab, to the right).
  5. To add a device to the list, do the following:
    Nota By default, any device that has previously connected to the jetpack already appears in the list.
    1. Click Add New Device (located in the lower-left).
    2. Configure/enter the following:
      • Tipo
      • Nombre
      • Dirección MAC
  6. Haz clic en Save Changes (ubicado en la parte inferior derecha).
  7. To turn on MAC filtering, do the following:
    1. Select (check) the MAC Address Filter option located to the right of the corresponding device(s).
    2. Haz clic en Save Changes (ubicado en la parte inferior derecha).
    3. Tap the MAC Filter switch to turn on.
    4. Oprime Confirmar.
isTealiumFlag=true