Kyocera DuraForce PRO with Sapphire Shield - Mobile Hotspot Settings

To configure Mobile Hotspot settings (e.g., password, allowed devices, etc.), view this info.

  1. En una de las pantallas de inicio, ve a: Apps Tap the Apps Icon > Settings Oprime Settings.
  2. Oprime Mobile Hotspot.
  3. From the Mobile Hotspot screen, select an option:

Set Up Mobile Hotspot

  1. Tap Set Up Mobile Hotspot.
  2. From the Set Up Mobile Hotspot screen, configure the following as needed:
    • Network SSID
    • Hide my device
      Nota Activado cuando hay una marca de verificación.
    • Security
      • Open
      • WPA2 PSK
        Nota Password protected (recommended to prevent unauthorized access to your hotspot).
    • Contraseña
      Nota Password can be cambiado.
    • Show password
      Nota Activado cuando hay una marca de verificación.
    • Canal de transmisión
  3. Tap SAVE.

Arriba

Administrar dispositivos

  1. From the Mobile Hotspot screen, tap the Menu icon Toca el ícono Menú (located in upper-right).
  2. Oprime Advanced.
  3. To set allowed devices, tap Manage devices.
  4. Tap Allow all devices to enable or disable.
    Nota Restricts which devices are allowed to connect when disabled (unchecked).
    Nota To add a device:
    1. Tap Add to allowed devices then select one of the following options:
      • Enter MAC address of the device
        • Enter the name and MAC address then tap OK.
      • Choose from connected devices
        • Choose a device from the list then tap OK.

Arriba

Timeout settings

  1. From the Mobile Hotspot screen, tap the Menu icon Toca el ícono Menú (located in upper-right).
  2. Oprime Advanced.
  3. Tap Timeout settings.
    Nota Sets how long before the hotspot will turn off after no activity.
  4. Selecciona una opción:
    • Never turns off
    • 5 minutos
    • 10 minutos
    • 20 minutos
    • 30 minutos
    • 60 minutos
  5. Tap the Back button (lower-left).

Arriba

isTealiumFlag=true