Kyocera DuraForce PRO with Sapphire Shield - Set Up Screen Lock

Nota Notas:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • También puedes utilizar estos pasos para cambiar tu configuración actual de bloqueo de pantalla.

 

  1. Desde la pantalla de inicio, ve hasta: el ícono Apps Ícono de la aplicación > Settings Ícono Settings.
  2. Tap Lock screen.
    Nota If prompted to add a Google account: Nota Si corresponde, ingresa el PIN, la contraseña o el patrón actuales.
  3. Tap Screen lock type.
  4. Oprime una de las siguientes opciones:

 

Deslízate

Swipe the Lock icon up to unlock the device.

 

Arriba

 

Pattern

Nota Se crea un patrón de desbloqueo para acceder al dispositivo.

  1. Draw an unlock pattern (connecting at least 4 dots) then tap Continue.
  2. Draw the same pattern again then tap Confirm.
  3. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Arriba

 

PIN

Nota A PIN is created to access the device.

  1. If presented with the 'PIN policy' screen, tap OK.
  2. Enter a numeric PIN (4 to 16 digits) then tap Continue.
  3. Re-enter the numeric PIN then tap OK.
  4. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Arriba

 

Password

Nota Se crea una contraseña para acceder al dispositivo.

  1. If presented with the 'Password policy' screen, tap OK.
  2. Enter a password (4 to 16 characters) then tap Continue.
  3. Re-enter the password then tap OK.
  4. If presented, select a notifications option then tap Done (located in the lower-right).
    • Show all notification content
    • Hide sensitive notification content
    • Don't show notifications at all

 

Arriba

 

Fingerprint

Nota Notas:

  • Se usa una huella dactilar para desbloquear el dispositivo.
  • Para que funcione el escáner de huellas dactilares, las manos deben estar limpias y no deben tener humedad, suciedad, aceite, loción, pigmentos, etc.
  • Up to four fingerprints can be registered on the device.

 

  1. Toca Continue (Continuar).
  2. If prompted, select a backup screen lock method then configurarlo.
    • Pattern
    • PIN
    • Password
  3. Oprime Next.
  4. Place your finger on the sensor until it vibrates then lift.
    Nota Repeat this step as necessary until the process is complete.
    Nota For greater accuracy, finger placement should vary slightly each time.
  5. Enter a name for the finger print then tap Done.

 

Arriba

isTealiumFlag=true