Phone Lock - Apple® iPhone® SE

precaución If the passcode is forgotten, the device needs to be restored to default settings using iTunes. Refer to this iTunes support page para obtener instrucciones.

  1. From the lock screen, swipe right then enter the passcode if prompted.
  2. Tap Settings Ícono Settings then tap Display & Brightness.
  3. Tap Auto-Lock then select the auto-lock time interval (e.g., 1 Minute, 2 Minutes, 5 minutes, etc.).
    Nota Seleccionado cuando haya una marca de verificación.
  4. Oprime Ícono Atrás Display & Brightness then tap Ícono Atrás Settings.
    Nota Located in the upper-left.
  5. Tap Touch ID & Passcode then tap Turn Passcode On.
    Nota If passcode is already turned on, enter the passcode then skip to step 8.
  6. Enter then re-enter the passcode.
  7. If preferred, tap Change Passcode then:
    1. Enter the old passcode then enter and confirm new passcode.
    2. Oprime Done.
  8. If desired, tap any of the following switch(es) to turn on Interruptor activado o desactivar Interruptor desactivado:
    Nota When turned on, access is allowed when the screen is locked.
    • Hoy
    • Notifications View
    • Siri
    • Reply with Message
    • Home Control
    • Carpeta
    • Borrar datos
      Nota When turned on, all data on device is erased after 10 failed passcode attempts.

 

Tema relacionado: Desbloquear el dispositivo

isTealiumFlag=true