Samsung Galaxy Tab E (8.0) - Manually Add a Wi-Fi Network

Nota Notas:

  • Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.
  • Here's how to check what versión de software your device is running.

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    Nota These instructions only apply to the default Home screen layout.
  2. Navigate: Settings Ícono Settings > Connections > Wi-Fi.
    Nota For software version 7.1.1 or earlier, navigate: Settings > Wi-Fi.
  3. Ensure the Wi-Fi switch (upper-right) is turned on Interruptor en On.
  4. Tap Add network (located at the bottom of list).
  5. From the Network name field, enter the appropriate name.
  6. From the Security field, tap the Dropdown menu icon Icono de menú desplegable.
  7. Selecciona la opción de seguridad apropiada:
    Nota Si usas una red abierta (None), salta al paso 9.
    • Ninguno
    • WEP
    • WPA/WPA2/FT PSK
    • 802.1x EAP
  8. En el campo Password, ingresa la contraseña adecuada.
    Nota Para ver la contraseña mientras la escribes, oprime (marca) Show password.
  9. Ensure additional settings (e.g., EAP method, CA certificate, etc.) are configured appropriately (if applicable) then tap SAVE (lower-right).

Temas relacionados:

isTealiumFlag=true