Samsung Galaxy Tab E (8.0) - Set Up Screen Lock

Nota Notas:

  • If using Microsoft® Exchange / Corporate sync, some screen lock options may be unavailable.
  • También puedes utilizar estos pasos para cambiar tu configuración actual de bloqueo de pantalla.
  • A pattern, PIN or password must be set up to turn on factory reset protection.
    Nota Changing screen lock to "None" or "Swipe" turns off this feature.
  • Here's how to check what versión de software your device is running.

  1. From a Home screen, swipe up or down from the center of the display to access the apps screen.
    Nota These instructions only apply to the default Home screen layout.
  2. Navigate: Settings Ícono Settings > Lock screen.
    Nota For software version 7.1.1 or earlier, navigate: Settings > Lock screen and security.
  3. Tap Screen lock type.
    Nota Si aparece, ingresa el PIN, la contraseña o el patrón actuales.
  4. Oprime una de las siguientes opciones:

Pattern

Nota Se crea un patrón de desbloqueo para acceder al dispositivo.

  1. Draw an unlock pattern (connecting at least 4 dots) then tap CONTINUE.
  2. Draw the same pattern again then tap CONFIRM.
  3. If presented, tap the Notifications switch (upper-right) to turn on Interruptor en On o desactivar Interruptor en Off then tap DONE.
    Nota When on, tap any of the following to turn on or off:
    • Hide content
    • Notification icons only

Arriba

PIN

Nota Se crea un número de identificación personal (PIN) para acceder al dispositivo.

  1. Enter a numeric PIN (4 to 16 digits) then tap CONTINUE.
  2. Re-enter the numeric PIN then tap OK.
  3. If presented, tap the Notifications switch (upper-right) to turn on Interruptor en On o desactivar Interruptor en Off then tap DONE.
    Nota When on, tap any of the following to turn on or off:
    • Hide content
    • Notification icons only

Arriba

Password

Nota Se crea una contraseña para acceder al dispositivo.

  1. Enter a password (4 to 16 characters, including at least one letter) then tap CONTINUE.
  2. Re-enter the password then tap OK.
  3. If presented, tap the Notifications switch (upper-right) to turn on Interruptor en On o desactivar Interruptor en Off then tap DONE.
    Nota When on, tap any of the following to turn on or off:
    • Hide content
    • Notification icons only

Arriba

isTealiumFlag=true