Install / Configure / Connect VZAccess® Manager v7.10 - Windows® 10

 

Nota Notas:

  • Se deben desinstalar las versiones anteriores de VZAccess Manager antes de continuar. Consulta Instalar/reinstalar VZAccess Manager para obtener ayuda.
  • The Windows 8.1 version of VZAccess manager will operate properly on Windows 10 after applying the work around outlined below.

 

Verizon 4G LTE USB551L
Pantech UML290
LG VL 600

 

Verizon 4G LTE USB551L

  1. Close any open apps, launch an Internet browser then navigate to http://vzam.net.
  2. From the left menu, click Consumer Downloads.
  3. From the operating system dropdown menu, select Windows 8.1 then follow the on-screen instructions to select the appropriate software for your hardware then tap Continue.
    Nota VZAccess Manager 7.10.0.1 (2823b) for Windows 8.1 is compatible with Windows 10.
  4. From Download VZAccess Manager, click Download Now.
  5. Locate download (in View Downloads folder) then click Run or Save.
    Nota If presented with a "User Account Control" prompt, click Continue.
    Nota If Save is selected, go to the file location and double-click the file.
  6. Click Install VZAccess Manager.
  7. From Verizon Mobile Broadband Driver install, click Next.
  8. Ensure "I agree with this software license agreement" is selected then click Next.
  9. From the wireless network driver selection, click LAN Adapter then click Next.
    Mobile Broadband Drivers with LAN Adapter chosen
  10. Click Install then click Finish (from the Install Shield Wizard Completed prompt).
  11. From the VZAccess manager install, click Next.
  12. Ensure "I agree with this software license agreement" is selected then click Next.
    Nota Los acuerdos de licencia de Smith Micro Software y de Wi-Fi de Verizon deben estar seleccionados.
  13. If presented, select the preferred view (Minimum/Full) then click Next.
  14. Haz clic en Siguiente.
  15. Haz clic en Siguiente.
  16. Ensure Typical is selected then click Next.
  17. Click Install then from the Install Shield Wizard Completed prompt click Finish.
  18. Launch the VZAccess manager and click Connect.
    Nota Si es necesario, consulta Establishing/Terminating an Internet Connection.

 

Arriba

 

Pantech UML290

  1. Ensure the current version of VZAccess manager for windows 8.1 is installed.
    Nota VZAccess Manager 7.10.0.1 (2822b) for Windows 8.1 is compatible with Windows 10.
    Nota Consulta Instalar/reinstalar VZAccess Manager para obtener ayuda.
  2. Launch VZAccess Manager.
    Nota From the Windows desktop, navigate: Start > All Programs (Programs) > VZAccess Manager.
    Nota With Windows 10, click Start > Apps icon ícono del menú Apps (located in the top-left corner) > All apps (located in the bottom-left corner) > VZAccess Manager.
  3. If presented, enter the PIN then click OK.
    Nota El PIN predeterminado es 1111.
  4. From the top menu, click Options > Preferences.
    Nota From the Minimum view, navigate: Menu > Options > Preferences.
  5. From the left menu, click Connect.
  6. From the Device operating mode dropdown select Lan Adapter.
    VZAccess Manager Connect Options
  7. After the operating mode configuration prompt, click OK to restart VZAccess manager.
  8. Launch the VZAccess manager and click Connect.
    Nota Si es necesario, consulta Establishing/Terminating an Internet Connection.

 

Arriba

 

LG VL 600

VZAccess Manager 7.10.0.1 (2821c) for Windows 8.1 is compatible with Windows 10.
Nota To obtain the correct version refer to Bajar e instalar VZAccess® Manager para obtener ayuda.

 

Arriba

isTealiumFlag=true