Verizon Ellipsis® 8 - Manually Add a Wi-Fi Network

Nota Wi-Fi network info is required to complete several steps. Refer to the network admin for assistance.

  1. From a Home screen, navigate: Apps Ícono de la aplicación > Settings.
  2. Tap Wi-Fi to turn on Indicador del interruptor en On.
  3. Toca el icono Menú Menú vertical (ubicado en la esquina superior derecha).
  4. Tap Add Network.
  5. From the Network name (SSID) field, enter the appropriate name.
  6. Tap Security then select the appropriate security option.
    Nota When using an Open network (not recommended), tap None then skip to step 6.
    • Ninguno
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
  7. Enter the appropriate password then tap Save.
    Nota To view the password as it is being entered, tap Show password (enabled when a check mark is present).
  8. Ensure any additional settings (e.g. Proxy settings, IP settings, etc.) are configured appropriately (if applicable) then tap Save (located in the lower right).
    Nota If you're unable to connect to Wi-Fi, refer to the Device Won't Connect to Wi-Fi section of Troubleshooting Common Issues - Verizon Ellipsis 8.

Temas relacionados:

isTealiumFlag=true