Manually Add a Wi-Fi Network - DROID RAZR M by MOTOROLA / Luge™ by Motorola

Nota Wi-Fi network info is required to complete several steps. Refer to the network administrator for assistance.

  1. From a Home screen, tap Apps.
  2. From the APPS tab, tap Settings.
  3. From the WIRELESS & NETWORKS section, tap Wi-Fi.
  4. Asegúrate de que el botón Wi-Fi (ubicado en la parte superior derecha) esté en la posición ON.
  5. Tap Add network (plus (+) symbol located at the bottom).
  6. Desde el campo Network SSID, ingresa el nombre adecuado.
  7. From the Security field, tap the dropdown menu.
  8. Selecciona la opción de seguridad apropiada:
    Nota Si usas una red abierta (None), salta al paso 10.
    • Ninguno
    • WEP
    • WPA/WPA2 PSK
    • 802.1x EAP
  9. En el campo Password, ingresa la contraseña adecuada.
    Nota To view the password as it is being entered, tap Show password (enabled when a check mark is present).
  10. Ensure additional settings (e.g. EAP method, Phase 2 authentication, CA certificate, etc.) are configured appropriately (if applicable) then tap Save (located in the lower-right).

Temas relacionados: