Verizon Jetpack® MiFi® 6620L Software Update

Verizon Wireless anuncia una actualización de software para tu teléfono.

Esta actualización de software ha sido probada para optimizar el rendimiento del teléfono, solucionar problemas desconocidos y aplicar los últimos parches de seguridad.

System Update 4

Software Version: MDM9x25_2.24.11_Linux_1.152.31

A software change was made to update a security protocol on the device.

Actualizado: 06/21/2018



Instrucciones para la actualización del sistema

To help you with the mandatory software update for your MIFI 6620L, this page tells you how to update your device one of two ways:

  • Network-initiated Over-the-Air (OTA) Software update for SU2.5
  • User-initiated OTA Software update for SU2.5


Network-initiated Software Update

Note: The device should be running the SU1 FW version 1.4 (MDM9x25_2.24.2_Linux_1.52.8.1.2) or SU2 FW version 2.0 (MDM9x25_2.24.10_Linux_1.152.24).

  1. Power the MiFi device ON and continue with normal operation.
  2. If a network-initiated software update is available for the device, it’ll receive a message from the network.The software update package will be downloaded to the device immediately.

    Note: The download will not be visible to you and won’t affect normal operation.

  3. Once the device downloads the software update package, the device screen will notify you. If set, you’ll also receive an audible alert.
  4. Select Install Now to proceed with the device software update. If you decide to install later, skip to Step 9.
Network Initiated Software Update - Install Now
Note: If your Jetpack is connected to a computer with a USB cable, please disconnect the USB cable before installing the software update.

  1. You'll receive a warning that the MiFi will not be usable during the software update process. Select Yes to continue.
Network Initiated Software Update - Mifi Not Usable During Software Update
  1. The MiFi will start updating its software.
Network Initiated Software Update - Mifi Will Start Updating Software
  1. As the MiFi is updating, the screen will display its progress.

  2. Once the software update is complete, the MiFi will power off and back on. The screen will inform you that the update was successful. Click OK to continue using your MiFi.
Network Initiated Software Update - Update Successful
  1. If you selected Install Later in step 4, you'll be notified that the software update will be installed the next time the device powers down. Select OK and continue with normal operation until the next shutdown.
  1. The next time you shut down the MiFi device, the software update will install before the device shuts down. You'll be updated about the progress through messages on the device as per steps 6-8.

User-Initiated OTA Software update

Note: The device should be running the SU1 FW version 1.4 (MDM9x25_2.24.2_Linux_1.152.8.1.2) or SU2 FW version 2.0 (MDM9x25_2.24.10_Linux_1.152.24).

  1. Power the MiFi device ON.
  2. Navigate to the Software Update menu on the device and select Next.
  3. The MiFi will ask if you'd like to check for updates. Select Yes.
  1. The MiFi will check the server to see if new software is available.
  1. Select OK. The device starts downloading the new software if available.


Note: The download won't affect normal operation.

User Initiated Software Update - Software Update Downoad Progress
  1. Once the download is complete, you’re given the option to install now or install later.
User Initiated Software Update - Install Now or Install Later Option
Note: If your Jetpack is connected to a computer with a USB cable, please disconnect the USB cable before installing the software update.

  1. If you select Install Now, you'll be notified that the MiFi will not be usable during the update process.
User Initiated Software Update - Install Now Option
  1. When you select Yes, the device resets and proceeds with the installation.
User Initiated Software Update - Proceed With Software Installation
  1. As the MiFi is updating, the screen will display its progress.
  1. Once the software update is complete, the MiFi will power off and back on. The screen will inform you that the update was successful. Click OK to continue using your MiFi.
User Initiated Software Update - Software Update Complete
  1. If you selected Install Later in step 6, you'll be notified that the software update will be installed the next time the device powers down. Select OK and continue with normal operation until the next shutdown.
User Initiated Software Update - Software Update Installed on Next Shutdown
  1. The next time you shut down the MiFi device, the software update will install before the device shuts down. You'll be updated about the progress through messages on the device as per steps 8-10.


Actualización del sistema

Software Version: 2.75

This software update fixes a Wi-Fi connectivity issue that many public safety customers were experiencing.

Fixed issue where USB tethering settings were changed back to default (Charge Only) after software update.

Fixed Wi-Fi connectivity issues.

You can now turn on Wi-Fi when using USB tethering.

Added data usage parameter to Mobile Broadband Management.

Fixed an issue where some devices were stuck in 1X.



isTealiumFlag=true