Just saw your post....had same issues with the card unmounting, etc., also access door didn't quite fit right. Key was using the Verizon microSD card tool. The pin unlocks the drawer, of course, but you must use the other side of the tool to push the microSD card further into the slot. It fully seats, and the outside end of the card is not near the opening of the slot, in fact it almost disappears into the slot. Reverse procedure to remove, of course.
Can't believe it was such a simple solution, as the card "feels" seated when it's really not.
Yup it's a Spring Mechanism that is part of the Slot that pull the SD an the Sim Card in to Fully seat it) If not for this the Card's especially the Sim would loose Contact with the Towers and cause the phone to work incorrectly.. The Sim tool helps to unseat the Cards and is supposed to help in the Door opening) Kind of wished Moto would've included it with the first Razr and Razr Maxx i seated the Cards in my Razr's with a Round Toothpick Cut flush on one end of it Works pretty good too.. b33
Start a new topic or ask questions in the open forum.
